PWR-LINE AP (US version) PWR-LINE AP (US version) The PWR-LINE AP is a wireless access point with a single Ethernet port, a built-in 802.11b/g/n WiFi radio and capability to connect to other PWR-LINE devices through the electrical lines in your premises. Since the device runs the same software as all other MikroTik products, it opens up a wide array of functions, all made possible with the extensive feature set present in RouterOS.
PWR-LINE AP (US version) An example of usage The PWR-LINE AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach. Especially useful in homes with thick walls, where you can extend Wi-Fi coverage to those rooms, where signal is poor, without having to re-wire your house. Simply plug this device directly into one of the LAN ports of your MikroTik router, and add another one somewhere further in your premises.
PWR-LINE AP (US version) Specifications Product code PL6411-2nD CPU QCA9533 CPU nominal frequency 650 MHz PLC chipset QCA6410 Size of RAM 64 MB Memory 16 MB Flash 10/100 Ethernet ports 1 Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain Wireless regulations Specific frequency range may be limited by country regulations Antenna gain 1.