User Manual
Table Of Contents
3.
4.
Secure the antenna with brackets and screws.
Adjust needed alignment.
Please avoid connecting loose cables to the connectors, secure the cable to a wall or the pole, so that the cable weight is not pulling the port. It is
recommended to secure the cable less than 2m from the antenna. This is to ensure that the cable doesn't damage the connectors by its weight, or doesn't
fall out.
Accessories can be purchased separately:
Flex-guide
Grounding
The installation infrastructure (towers and masts), as well as the router itself, must be properly grounded. The antenna includes a grounding wire
attachment screw behind the case door. Attach your grounding wire to the grounding screw, then attach the other end of the grounding wire to the
grounded mast. This is to substantially reduce the risk of ESD and lightning damage.