Brochure
2
CWDM
CWDM
Our product range includes CWDM-MUX8A, the 8-port CWDM MUX/DEMUX unit (supports both SFP and SFP+
which can be mixed at the same time), CWDM-CHASSIS-2, a 1U Chassis bracket (can hold two
CWDM-MUX8A units). Eight dierent SFP CWDM transceivers (1.25G, Single Mode, 40km range,
Dual LC-connector DDM, range from 1470-1610nm, same wavelength pair required for a link) and eight dierent
SFP+ CWDM transceivers (10G, Single Mode, 10km range, Dual LC-connector DDM, range from 1470-1610nm,
same wavelength pair required for a link).
Our CWDM solution enables up to 8 channels for transmitting and receiving signals, with the wavelengths from
1470 nm to 1610 nm. A duplex fiber cable links two dual-fiber CWDM MUX/DEMUXs units, supporting the same
wavelengths installed on each end of the fiber optic network. In each CWDM unit is a filter, which is tuned for a
specific wavelength which is why it is important to connect the correct wavelength to the corresponding port.
You can use a single optical fiber cable to create up to eight independent 1.25Gbps SFP (up to 40km)
or 10Gbps SFP+ (up to 10km) links, oering more aordable alternative to installing more fiber or leasing
additional fibers. You can even use 1.25Gbps modules and 10Gbps modules at the same time.
CWDM MUX/DEMUX modules are passive devices and there is no power source required.