User Manual

Table Of Contents
RB260-series
RB260GS
RB260GSP
The CSS106 is a network switch with five Ethernet ports and one SFP, it is powered by the SwOS operating system. It is already configured, with all ports
switched together. We recommend you to set up a password to secure your device. CSS106-1G-4P-1S has PoE output capabilities on four of it's Ethernet
ports.
Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
Powering
The power consumption of this device under maximum load is up to 11 W. The device accepts powering in the following ways:
Direct-input power jack (5.5mm outside and 2mm inside, female, pin positive plug) accepts 8-30 V DC.
The combo ethernet port accepts passive Power over Ethernet 8-30 V DC, PoE injector is not included.
First use
https://wiki.mikrotik.com/wiki/SwOS/RB250_RB260#Connecting_to_the_switch
Connect your Ethernet cables to the five ethernet ports and one available SFP port. Ports are switched, so any order is possible.
Power the device either from the power jack (11-30 V accepted, a power adapter is bundled with the device) or from the first port over Passive
PoE (11-30 V).
For accessing the SwOS configuration interface, set your LAN computer IP configuration to static IP 192.168.88.2.
The default IP address is 192.168.88.1, the SwOS interface is available via the web browser, the username is admin and there is no password.
Set a strong password for the device.
Configuration
The device is set up as a switch, with 192.168.88.1 as the management IP of the master interface.
SwOS is an operating system designed specifically for the administration of MikroTik switch products.
SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows you to manage port-to-port
forwarding, broadcast storm control, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header
fields.
https://wiki.mikrotik.com/wiki/SwOS/RB250_RB260
Power Output

Summary of content (6 pages)