Quick Guide

LED indicators
• Power LED is lit when the router is powered from the DC jack.
• The user LED can be configured from RouterOS.
• The square port LEDs indicate the individual ethernet and SFP port activity.
• Triangle LEDs indicate PoE out status. Green LED indicates that the respective port uses low voltage, a
red LED indicates high voltage. Flashing single green LED: problem to start low voltage device. Flashing
single red LED: problem with high voltage device. All PoE LEDs flashing: wrong voltage PSU plugged into
one of the ports.
Grounding
The device has a grounding wingnut attached to the back of it’s case. You can attach a grounding wire to this
wingnut and connect it to a grounding bus bar that is typically available in a server room and which is then
connected to an earth ground.
Operating System Support
The device supports RouterOS software with the version number at or above what is indicated in the RouterOS
menu /system resource. Other operating systems have not been tested.
For more information see www.mikrotik.com or contact [e-mail] Document #35432. Modified on 09/26/17