Brochure

CRS112-8P-4S-IN

CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that oers dierent power output options: auto-

sensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical ﬁber connectivity options to

support uplinks of up to 1 Gbps.

CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included

in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not

included, can be purchased separately). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is

used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input

voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V.

Our CRS series combines a fully functional router and a managable switch with L3 features, it’s powered by

the familiar RouterOS. All the speciﬁc Switch conﬁguration options are available in a special Switch menu, but

if you want, ports can be removed from the switch conﬁguration, and used for routing purposes. It gives you all

the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC

ﬁlter, conﬁgure VLANs, mirror trac, apply bandwidth limitation and even adjust some MAC and IP header

ﬁelds. IGMP snooping is also supported.

• Non-blocking Layer 2 switching capacity

• 16K host table

• IEEE 802.1Q VLAN

• Supports up to 4K simultaneous VLANs

• Port isolation

• Port security

• Broadcast storm control

• Port mirroring of ingress/egress trac

• Rapid Spanning Tree Protocol

• Access Control List

• MikroTik neighbor discovery

• SNMP

• 9204-byte jumbo frames support

• IGMP snooping

• static link aggregation

• 8 Gigabit RJ45 Ports

• 4 SFP Ports

• Non-Blocking Throughput: 12 Gbps

• Switching Capacity: 24 Gbps

• Forwarding Rate: 17.8 Mpps

• Maximum Power Consumption: 10 W (without

PoE devices connected)

• Supports PoE+ IEEE 802.3at/af and 24 V

Passive PoE

• Quiet, Fanless Operation

• Desktop-Rackmount

Switching features Quick speciﬁcations

PAGE 1
CRS112-8P-4S-IN CRS112-8P-4S-IN CRS112-8P-4S-IN is eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps. CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box.
PAGE 2
CRS112-8P-4S-IN Specifications Product code CRS112-8P-4S-IN CPU nominal frequency QCA8511 Size of RAM 128 MB Storage type Flash Storage size 16 MB 10/100/1000 Ethernet ports 8 SFP ports 4 Serial port RJ45 PoE out Yes, 802.3af/at Supported input voltage 18 V - 57 V Dimensions 200 x 142 x 44 mm Operating system RouterOS, level 5 license Max power consumption 160 W Max power consumption without attachments 10 W Power adapter 28 V 3.