User Manual

ManualsBrandsMikroTik ManualsComputers & AccessoriesCCR2004-1G-12S+2XS

Table Of Contents

CCR2004-1G-12S+2XS

CCR2004-1G-12S+2XS

Cloud Core Router 2004-1G-12S+2XS

TheCCR2004 is a high-performance multicore router with twelve 10G SFP+ ports and two 25G SFP28 ports.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

Read the installation instructions before connecting the system to the power source.

Quick start

Connect with your computer to the device using Ethernet cable;

Download the configuration tool ;https://mt.lv/winbox

Open the tab and connect to the device using MAC address;

Neighbors



Theuser name: , by the default there is no password;

admin

To dupdate the device to the latest software version ownload the latest RouterOS software from ;https://mikrotik.com/download

Choose ARM64 packages, and save them to your computer;

Return to the WinBox and upload downloaded packages to the Files menu;

Restart the device.

Detailed info on how to upgrade the device ;https://mt.lv/upgrade

Set a strong password.

Powering

The device has dual integrated power supply units AC 110-240V (5 A) with standard IEC compatible sockets with Maximum power consumption of 32 W,

with attachments 49 W.

Configuration

The Ethernet port 1 has a default IP address for connecting: 192.168.88.1. Username is admin and there is no password. The device doesn't have any

other configuration applied by default, please set up WAN IP addresses, user password, and update the device. RouterOS includes many configuration

options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: . In case https://mt.lv/help

the IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN sidehttps://mt.lv/winbox

For recovery purposes, it is possible to boot the device for reinstallation, see a section Reset button.

Specifications

Size of RAM notice - RouterOS v6 will support 1792MB ECC / to fully utilize please use RouterOS v7 4GB ECC.

Summary of content (6 pages)

PAGE 1
CCR2004-1G-12S+2XS Cloud Core Router 2004-1G-12S+2XS The CCR2004 is a high-performance multicore router with twelve 10G SFP+ ports and two 25G SFP28 ports. Safety Warnings Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. Ultimate disposal of this product should be handled according to all national laws and regulations.
PAGE 2
Reset button The reset button has two functions: Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration. Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers. Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.
PAGE 3
The device supports RouterOS software with the version number v6.46 at or above what is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. CE Declaration of Conformity Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС.
PAGE 4
IT Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: https://mikrotik.com/products IS Hér með lýsir Mikrotīkls SIA því yfir að RouterBOARD er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.
PAGE 5
BG. Инструкция: Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в уеб браузър, за да настроите продукта. Повече информация в {+}https://mt.lv/help-bg+ CS. Návod k použití: Připojte napájecí adaptér k zapnutí přístroje. Otevřete 192.168.88.1 ve webovém prohlížeči pro konfiguraci produktu. Více informací najdete v {+}https://mt.lv/help-cs+ DA. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet.
PAGE 6