Brochure
3
CCR1072-1G-8S+
CCR1072-1G-8S+
CCR1072-1G-8S+ Tile 72 Core (1200Mhz, DDR1333) Max possible throughput
Mode Configuration
1518 byte 512 byte 64 byte
Mbps kpps Mbps kpps Mbps kpps
Bridging none (fast path) 78,960.3 6,502.0 76,963.8 18,790.0 60,952.4 119,047.6
Bridging 25 bridge filter rules 74,448.8 6,130.5 33,557.3 8,192.7 5,293.8 10,339.5
Routing none (fast path) 78,960.3 6,502.0 76,963.8 18,790.0 44,291.6 86,507.0
Routing 25 simple queues 78,960.3 6,502.0 50,669.2 12,370.4 6,898.8 13,474.2
Routing 25 ip filter rules 56,683.3 4,667.6 24,515.0 5,985.1 3,007.4 5,873.8
Performance test results
1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was
maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, dierent
configurations most likely will result in lower results