Brochure
3
CCR1036-8G-2S+
CCR1036-8G-2S+
CCR1036-8G-2S+ Tile 36 core max possible throughput test
Mode Configuration
1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Bridging 25 bridge filter rules 2275.7 27636.1 5179.7 21216.1 5163.5 2643.7
Routing none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Routing 25 simple queues 2275.7 27636.1 6553.3 26842.3 7643.1 3913.3
Routing 25 ip filter rules 1825.7 22171.3 3033.9 12426.9 3049.7 1561.4
CCR1036-8G-2S+ CCR1036 series IPsec throughput
Mode Configuration
1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 130.5 1461.6 123.4 505.4 115.4 59.1
256 tunnels AES-128-CBC + SHA1 912.9 10224.5 1037.4 4249.2 1053.1 539.2
256 tunnels AES-128-CBC + SHA256 902.7 10110.2 1032.8 4230.3 1025.7 525.2
256 tunnels AES-256-CBC + SHA1 901.0 10091.2 1028.3 4211.9 998.2 511.1
256 tunnels AES-256-CBC + SHA256 892.5 9996.0 982.9 4026.0 970.7 497.0
Included parts
Performance test results
1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, dierent
configurations most likely will result in lower results
2 IEC cords Rack ears Screw kit