User manual

22 l
Robotics experiment with PIC microcontroller
1.5.9 Put 4 of AA batteries into battery holder of the RBX-877V2.0 Controller board.
1.5.10 Connect the USB programer with PC’s USB port
1.5.11 Connect the ICD2 cable between the USB programmer and the RBX-877V2.0
Controller board.
1.5.12 Turn-on the power to the RBX-877 V2.0 Controlller board.
1.5.13 Open the PICkit2
TM
Programming software.
1.5.14 If all connections are correct, the PICkit2
TM
Programming software will check
the target microontroller automaticcaly and show PIC16F887 is found.