User manual

Robotics experiment with PIC microcontroller l 15

(b) Access only Flash program memory

Click at Enabled box in EEPROM data border to remove the mark. At

EEPROM data border will show Preserve device EEPROM data on write in red message.

It means the EEPROM data memory will be protected. User can access only Flash pro-

gram memory. See the illlustration below.

1.3.2.3 Updating the USB Programmer Firmware

To update the programmer firmware Operating System, complete the following steps.

(1) Download the latest PICkit 2 Operating System from the Microchip web site

at www.microchip.com. Because the Robo-PICA’s USB programmer is compatible

Microchip’s PICkit2

programmer.

(2) From the menu, select Tools à Download PICKit 2 OS Firmware, as shown in

figure below