User manual

14 l Robotics experiment with PIC microcontroller
• Fast Programming - Select the PX-200 to programs the Flash device with high speed.
• Check Communication – Verifies communication with the USB Programmer
and reads the device ID of the target MCU.
• Download PICkit 2 Firmware – Performs a download of the USB Programmer
firmware operating system. (this USB programmer is compatible PICkit2
TM
Programmer).
Sometime call this function to OS update.
Help
Displays all user manual, technical document and a dialog box indicating the
version and date.
1.3.2.2.3 Important things to know in using the PICkit2
TM
Programming Software
Editing memory value
The PICkit2
TM
Programming Software supports the editing memory value in each
address, both Flash program and data EEPROM memory. User can click at any address
that need to change the value and input the new value directly.
Moreover user can select to access both memory types and only one.
(a) Access only EEPROM data memory
Click at Enabled box in Program Memory border to remove the mark. At
EEPROM data border, it will show Write and Read EEPROM data only in red message. It
means user can read and write only EEPROM data memory. See the illlustration below.
-