User manual

Robotics experiment with PIC microcontroller l 11
(3) If the connection is incompleted. The message PICkit 2 not found. Check USB
connections and use Tools à Check Communication to retry will appear in the Status
box. Check the cables and connections.
(4) Go to Tools menu and select Check Communication command. If all’s cor-
rect, the message
PICkit 2 found and connected will be show in the Status box.
However if everytime during re-connection or checking hardware, it does not
connect the target microcontroller at ICD2 jack and ICSP point or any mismatch in
number, the warning dialog box will appear. It will warn you about any error supply
voltage. You need not worry about this, click on the OK button to continue.