Specifications

mikroElektronika | Free Online Book | PIC Microcontrollers | Chapter 5: CCP Modules
ECCPASE - ECCP Auto-Shutdown Event Status bit indicates whether shut-down of CCP module has occurred (Shutdown
state):
● 1 - CCP module is in Shutdown state; and
● 0 - CCP module operates normally.
ECCPAS2 - ECCPAS0 - ECCP Auto-Shutdown Source Select bits select auto shutdown source:
ECCPAS2 ECCPAS1 ECCPAS0 Shutdown state source
0 0 0 Shutdown state disabled
0 0 1 Comparator C1 output change
0 1 0 Comparator C2 output change
0 1 1 Comparator C1 or C2 output change
1 0 0 Logic zero (0) on INT pin
1 0 1 Logic zero (0) on INT pin or comparator C1 output change
1 1 0 Logic zero (0) on INT pin or comparator C2 output change
1 1 1 Logic zero (0) on INT pin or comparator C1 or C2 output change
Table 5-7 ECCPAS Register
PSSAC1, PSSAC0 - Pins P1A, P1C Shutdown State Control bits define logic state on output pins P1A and P1C when CCP
module is in shutdown state.
PSSAC1 PSSAC0 Pins logic state
0 0 0
0 1 1
1 X High impedance (Tri-state)
Table 5-8 A&C Logic States
PSSBD1, PSSBD0 - Pins P1B, P1D Shutdown State Control bits define logic state on output pins P1B and P1D when CCP
module is in shutdown state.
PSSBD1 PSSBD0 Pins logic state
0 0 0
0 1 1
1 X High impedance (Tri-state)
Table 5-9 B&D Logic States
Previous Chapter | Table of Contents | Next Chapter
http://www.mikroe.com/en/books/picmcubook/ch5/ (15 of 15)5/3/2009 11:33:21 AM