Specifications

mikroElektronika | Free Online Book | PIC Microcontrollers | Appendix C: Development Systems
The program is written and successfully compiled. All that’s left is to dump the program to the
microcontroller. For this purpose it is necessary to have software that takes the written and
compiled program and passes it into the microcontroller ( PIC Flash for example). Start up this
program...
The settings are simple and there is no need for additional explanations (the type of the
microcontroller, frequency and clock oscillator etc.).
● Connect the PC and programmer via a USB cable;
● Load the HEX code using command: File -> Load HEX; and
● Click the "Write" push-button and wait...
http://www.mikroe.com/en/books/picmcubook/appc/ (5 of 7)5/3/2009 11:36:25 AM