Specifications

mikroElektronika | Free Online Book | PIC Microcontrollers | Appendix B: Examples
4. Character entry
ID = 1 Displayed addresses are automatically incremented by 1
S = 0 Display shift off
Automatic reset is mostly done without any problems. Mostly, but not always! If for any reason the power supply voltage
does not reach full value within 10mS, the display will start performing completely unpredictably. If the voltage supply
unit is not able to meet that condition or if it is needed to provide completely safe operation, the process of initialization
is applied. Initialization, among other things, causes a new reset enabling display to operate normally.
Automatic reset is mostly done without any problems. Mostly, but not always! If for any reason power supply voltage does
not reach full value within 10mS, display will start performing completely unpredictably. If voltage supply unit is not able
to meet that condition or if it is needed to provide completely safe operation, the process of initialization is applied.
Initialization, among other things, causes a new reset enabling display to operate normally.
Refer to the figure below for the procedure on 8-bit initialization:
http://www.mikroe.com/en/books/picmcubook/appb/ (17 of 54)5/3/2009 11:36:02 AM