Datasheet

Programming PIC Microcontrollers in BASIC - mikroElektronika
Description The procedure writes 1 byte to Compact Flash. The procedure has effect only if CF card is initialized for writing.
Parameters:
CtrlPort - control port,
DataPort - data port,
dat - data byte written to CF
Example
CF_Write_Init(PORTB, PORTD, 590, 1) ' Initialize write at sector address 590
' of 1 sector (512 bytes)
for i = 0 to 511 ' Write 512 bytes to sector at address
590
CF_Write_Byte(PORTB, PORTD, i)
next i
5.2.5.5 CF_Write_Word – Writes 1 word to CF
Prototype
sub procedure CF_WRITE_WORD(dim byref CtrlPort as byte, dim byref DataPort
as byte, dim WData as word)
http://www.mikroelektronika.co.yu/english/product/books/picbasicbook/05.htm (45 sur 112)05/11/2004 02:20:52