Datasheet

Programming PIC Microcontrollers in BASIC - mikroElektronika

allows you to monitor transfer and to set all the necessary transfer settings. First of all, we need to set the transfer rate to

2400 to match the microcontroller's rate. Then, select the appropriate communication port by clicking one of the 4

available (check where you plugged the serial cable).

After making these adjustments, clicking Connect starts the communication. Type your message and click Send Message

– message will be sent to the microcontroller and back, where it will be displayed on the screen.

Note that serial communication can also be software based on any of 2 microcontroller pins – for more information, check

the Chapter 9: Communications.

PIC, PIC, PICmicro, and MPLAB are registered and protected trademarks of the Microchip Technology Inc. USA. Microchip logo

and name are the registered tokens of the Microchip Technology. mikroBasic is a registered trade mark of mikroElektronika. All

other tokens mentioned in the book are the property of the companies to which they belong.

http://www.mikroelektronika.co.yu/english/product/books/picbasicbook/06.htm (12 sur 12)05/11/2004 02:26:25