User`s guide

EasyPIC
™
v7 contains three GND pins located in three dierent sections of the board,
which allow you to easily connect oscilloscope GND reference when you monitor
signals on microcontroller pins, or signals of on-board modules.
GND is located between UART module and 4-digit 7-seg display.
GND is located in the cross section between DIP18 and DIP14 sockets
GND is located between PORTD I/O group and DIP28 socket.
Additional GNDs
1
1
1
2
3
2
2
3
3
Figure 20-1:
3 oscilloscope
GND pins are
conveniently
positioned so each
part of the board
can be reached with
an oscilloscope probe
page 33
modules