Datasheet

Page 11
4. Powering target device via mikroProg
™
One of the key benets of mikroProg™ is that is can power your
target device. You can set power supply voltage in range from
2.7V to 5V with output current up to 250mA. This option is
activated from mikroProg Suite™ for PIC® (v2.29) software.
Click the MCU Info button to display Voltage Options section.
First you must select MCU family and choose your target
MCU from a dropdown list. mikroProg™ will automatically set
the default value of power supply for your MCU. You can also
manually set voltage supply value by moving slider under
mikroProg Suite™ for PIC® window, Figure 4-1.
To enable power supply, rst set desired voltage and then click
on check box “Power board from programmer”.
01
03
02
Setting supply voltage value from 2.7 to 5V (max 250mA)
Check box for enabling supply voltage from programmer
Box with selected supply voltage
02
01
03
Figure 4-1: Voltage options