Datasheet

 2009-2011 Microchip Technology Inc. DS39960D-page 439
PIC18F87K22 FAMILY
ANDWF AND W with f
Syntax: ANDWF f {,d {,a}}
Operands: 0
 f  255
d
[0,1]
a
[0,1]
Operation: (W) .AND. (f)
 dest
Status Affected: N, Z
Encoding:
0001 01da ffff ffff
Description: The contents of W are ANDed with
register ‘f’. If ‘d’ is ‘
0’, the result is stored
in W. If ‘d’ is ‘
1’, the result is stored back
in register ‘f’.
If ‘a’ is ‘
0’, the Access Bank is selected.
If ‘a’ is ‘
1’, the BSR is used to select the
GPR bank.
If ‘a’ is ‘
0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f
95 (5Fh). See
Section 29.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode”
for details.
Words: 1
Cycles: 1
Q Cycle Activity:
Q1 Q2 Q3 Q4
Decode Read
register ‘f’
Process
Data
Write to
destination
Example:
ANDWF REG, 0, 0
Before Instruction
W = 17h
REG = C2h
After Instruction
W = 02h
REG = C2h
BC Branch if Carry
Syntax: BC n
Operands: -128
 n  127
Operation: if Carry bit is ‘
1’,
(PC) + 2 + 2n
 PC
Status Affected: None
Encoding:
1110 0010 nnnn nnnn
Description: If the Carry bit is ’1’, then the program
will branch.
The 2’s complement number ‘2n’ is
added to the PC. Since the PC will have
incremented to fetch the next
instruction, the new address will be
PC + 2 + 2n. This instruction is then a
two-cycle instruction.
Words: 1
Cycles: 1(2)
Q Cycle Activity:
If Jump:
Q1 Q2 Q3 Q4
Decode Read literal
‘n’
Process
Data
Write to
PC
No
operation
No
operation
No
operation
No
operation
If No Jump:
Q1 Q2 Q3 Q4
Decode Read literal
‘n’
Process
Data
No
operation
Example:
HERE BC 5
Before Instruction
PC = address
(HERE)
After Instruction
If Carry =
1;
PC = address
(HERE + 12)
If Carry = 0;
PC = address
(HERE + 2)