User manual

mikroPascal PRO for PIC32
MikroElektronika
491
SPI_T6963C_cursor
SPI_T6963C_cursor_blink
Prototype
procedure SPI_T6963C_cursor(n : word);
Description Set cursor on/off.
Parameters - n: on/off parameter. Valid values: 0 (set cursor off) and 1 (set cursor on).
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
// set cursor on
SPI_T6963C_cursor(1);
Notes None.
Prototype
procedure SPI_T6963C_cursor_blink(n : word);
Description Enable/disable cursor blinking.
Parameters - n: cursor blinking enable/disable parameter. Valid values: 0 (disable cursor blinking) and 1 (enable
cursor blinking).
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
// enable cursor blinking
SPI_T6963C_cursor_blink(1);
Notes None.
Library Example
The following drawing demo tests advanced routines of the SPI T6963C Glcd library. Hardware congurations in this
example are made for the LV-32MX v6 board and PIC32MX460F512L.
Copy Code To Clipboard
program SPI_T6963C_240x128;
uses __Lib_SPIT6963C_Const;
var
// Port Expander module connections
SPExpanderRST : sbit at LATD8_bit; // for writing to output pin always use latch
SPExpanderCS : sbit at LATD9_bit; // for writing to output pin always use latch
SPExpanderRST_Direction : sbit at TRISD8_bit;
SPExpanderCS_Direction : sbit at TRISD9_bit;
// End Port Expander module connections
var panel : byte; // current panel
i : word; // general purpose register
curs : byte; // cursor visibility
cposx,
cposy : word; // cursor x-y position
txt, txt1 : string[29];
txt2 : string[21];