User manual
mikroPascal PRO for dsPIC30/33 and PIC24
MikroElektronika
700
Paths for Source Files (.mpas)
You can specify either absolute or relative path to the source le. If you specify a relative path, mikroPascal PRO for
dsPIC30/33 and PIC24 will look for the le in following locations, in this particular order:
1. the project folder (folder which contains the project le .mppds),
2. your custom search paths,
3. mikroPascal PRO for dsPIC30/33 and PIC24 installation folder > Uses folder.
Related topics:File Menu, File Toolbar, Project Manager, Project Settings,
Edit Project
Edit Project gives you option to change MCU you wish to use, change its oscillator frequency and build type. Also, Edit
Project enables you to alter specic conguration bits of the selected device.
As you alter these bits, appropriate register values will be updated also. This can be viewed in the Conguration
Registers pane.
When you have nished conguring your device, you can save bit conguration as a scheme,
using button.
In case you need this scheme in another project, you can load it using button.
There is also a button which lets you select default conguration bit settings for the selected device.
Related topics: Project Settings, Customizing Projects