User manual

583
mikoPascal PRO for dsPIC30/33 and PIC24
MikroElektronika
T6963C_cursor_blink
Prototype
procedure T6963C_cursor_blink(n : word);
Description Enable/disable cursor blinking.
Parameters - n: cursor blinking enable/disable parameter. Valid values: 0 (disable cursor blinking) and 1 (enable
cursor blinking).
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
// enable cursor blinking
T6963C_cursor_blink(1);
Notes None.
Library Example
The following drawing demo tests advanced routines of the T6963C Glcd library. Hardware congurations in this
example are made for the EasydsPIC4A board and dsPIC30F4013.
Copy Code To Clipboard
program T6963C_240x128;
uses __Lib_T6963C_Consts;
// T6963C module connections
var T6963C_dataPort : byte at PORTB; // DATA port
var T6963C_ctrlwr : sbit at LATF2_bit; // WR write signal
var T6963C_ctrlrd : sbit at LATF1_bit; // RD read signal
var T6963C_ctrlcd : sbit at LATF0_bit; // CD command/data signal
var T6963C_ctrlrst : sbit at LATF4_bit; // RST reset signal
var T6963C_ctrlwr_Direction : sbit at TRISF2_bit; // WR write signal direction
var T6963C_ctrlrd_Direction : sbit at TRISF1_bit; // RD read signal direction
var T6963C_ctrlcd_Direction : sbit at TRISF0_bit; // CD command/data signal direction
var T6963C_ctrlrst_Direction : sbit at TRISF4_bit; // RST reset signal direction
// Signals not used by library, they are set in main function
var T6963C_ctrlce : sbit at LATF3_bit; // CE signal
var T6963C_ctrlfs : sbit at LATF6_bit; // FS signal
var T6963C_ctrlmd : sbit at LATF5_bit; // MD signal
var T6963C_ctrlce_Direction : sbit at TRISF3_bit; // CE signal direction
var T6963C_ctrlfs_Direction : sbit at TRISF6_bit; // FS signal direction
var T6963C_ctrlmd_Direction : sbit at TRISF5_bit; // MD signal direction
// End T6963C module connections
var panel : byte; // current panel
i : word; // general purpose register
curs : byte; // cursor visibility
cposx,
cposy : word; // cursor x-y position