User manual

503
mikoPascal PRO for dsPIC30/33 and PIC24
MikroElektronika
Returns Nothing.
Requires Global variables:
- SPI_Ethernet_24j600_CS: Chip Select line
- SPI_Ethernet_24j600_CS_Direction: Direction of the Chip Select pin
- SPI_Ethernet_24j600_RST: Reset line
- SPI_Ethernet_24j600_RST_Direction: Direction of the Reset pin
must be dened before using this function.
The SPI module needs to be initialized. See the SPIx_Init and SPIx_Init_Advanced routines.
Example
// SPI Ethernet ENC24J600 module connections
var SPI_Ethernet_24j600_CS : sbit at RF1_bit;
var SPI_Ethernet_24j600_CS_Direction : sbit at TRISF1_bit;
var
myMacAddr : array[6] of byte; // my MAC address
myIpAddr : array[4] of byte; // my IP addr
...
myMacAddr[0] := 0x00;
myMacAddr[1] := 0x14;
myMacAddr[2] := 0xA5;
myMacAddr[3] := 0x76;
myMacAddr[4] := 0x19;
myMacAddr[5] := 0x3F;
myIpAddr[0] := 192;
myIpAddr[1] := 168;
myIpAddr[2] := 1;
myIpAddr[3] := 60;
SPI1_Init();
SPI_Ethernet_24j600_Init(myMacAddr, myIpAddr, SPI_Ethernet_24j600_MANUAL_
NEGOTIATION and SPI_Ethernet_24j600_FULLDUPLEX and SPI_Ethernet_24j600_
SPD100);
Notes None.