Datasheet

SPI_T6963C_Image
SPI_T6963C_Sprite
439
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroPASCAL PRO for AVR
CHAPTER 6
Prototype
procedure SPI_T6963C_image(const pic : ^byte);
Returns Nothing.
Description
Displays bitmap on Glcd.
Parameters :
-
pic: image to be displayed. Bitmap array can be located in both code and
RAM memory (due to the mikroPascal PRO for AVR pointer to const and
pointer to RAM equivalency).
Use the mikroPascal’s integrated Glcd Bitmap Editor (menu option Tools › Glcd
Bitmap Editor) to convert image to a constant array suitable for displaying on Glcd.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_Image(my_image);
Prototype
procedure SPI_T6963C_sprite(px, py : byte; const pic : ^byte; sx,
sy : byte);
Returns Nothing.
Description
Fills graphic rectangle area (px, py) to (px+sx, py+sy) with custom size picture.
Parameters :
-
px: x coordinate of the upper left picture corner. Valid values: multiples of the
font width
-
py: y coordinate of the upper left picture corner
- pic: picture to be displayed
- sx: picture width. Valid values: multiples of the font width
- sy: picture height
Note: If px and sx parameters are not multiples of the font width they will be
scaled to the nearest lower number that is a multiple of the font width.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_Sprite(76, 4, einstein, 88, 119); // draw a sprite