Datasheet

SPI_T6963C_WriteCommand
SPI_T6963C_SetPtr
SPI_T6963C_WaitReady
433
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroPASCAL PRO for AVR
CHAPTER 6
Prototype
procedure SPI_T6963C_WriteCommand(Ddata : byte);
Returns Nothing.
Description
Writes command to T6963C controller via SPI interface.
Parameters :
-
Ddata: command to be written
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_WriteCommand(SPI_T6963C_CURSOR_POINTER_SET);
Prototype
procedure SPI_T6963C_SetPtr(p : word; c : byte);
Returns Nothing.
Description
Sets the memory pointer p for command c.
Parameters :
-
p: address where command should be written
- c: command to be written
Requires SToshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_SetPtr(T6963C_grHomeAddr + start,
T6963C_ADDRESS_POINTER_SET);
Prototype
procedure SPI_T6963C_WaitReady();
Returns Nothing.
Description Pools the status byte, and loops until Toshiba Glcd module is ready.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Config routine.
Example
SPI_T6963C_WaitReady();