Datasheet

SPI1_Init_Advanced
375
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroPASCAL PRO for AVR
CHAPTER 6
Prototype
procedure SPI1_Init_Advanced(mode : byte; fcy_div : byte;
and_edge : byte)
Returns Nothing.
Description
Configures and initializes SPI. SPI1_Init_Advanced or SPI1_Init needs to be
called before using other functions of SPI Library.
Parameters
mode, fcy_div and clock_and_edge determine the work mode for
SPI, and can have the following values:
Note: Some SPI clock speeds are not supported by all AVR MCUs and these
are: Fosc/2, Fosc/8, Fosc/32. Please consult appropriate datasheet.
Mask Description Predefined library const
SPI mode constants:
0x10 Master mode _SPI_MASTER
0x00 Slave mode _SPI_SLAVE
Clock rate select constants:
0x00 Sck = Fosc/4, Master mode _SPI_FCY_DIV4
0x01 Sck = Fosc/16, Master mode _SPI_FCY_DIV16
0x02 Sck = Fosc/64, Master mode _SPI_FCY_DIV64
0x03 Sck = Fosc/128, Master mode _SPI_FCY_DIV128
0x04 Sck = Fosc/2, Master mode _SPI_FCY_DIV2
0x05 Sck = Fosc/8, Master mode _SPI_FCY_DIV8
0x06 Sck = Fosc/32, Master mode _SPI_FCY_DIV32
SPI clock polarity and phase constants:
0x00
Clock idle level is low,
sample on rising edge
_SPI_CLK_LO_LEADING
0x04
Clock idle level is low,
sample on falling edge
_SPI_CLK_LO_TRAILING
0x08
Clock idle level is high,
sample on rising edge
_SPI_CLK_HI_LEADING
0x0C
Clock idle level is high,
sample on falling edge
_SPI_CLK_HI_TRAILING