User manual

mikroC PRO for PIC32
MikroElektronika
665
Customizing Projects
You can change basic project settings in the Project Settings window. You can change chip, and oscillator frequency.
Any change in the Project Setting Window affects currently active project only, so in case more than one project is open,
you have to ensure that exactly the desired project is set as active one in the Project Manager. Also, you can change
conguration bits of the selected chip in the Edit Project window.
Managing Project Group
mikroC PRO for PIC32 IDE provides convenient option which enables several projects to be open simultaneously. If
you have several projects being connected in some way, you can create a project group.
The project group may be saved by clicking the Save Project Group Icon from the Project Manager window.
The project group may be reopened by clicking the Open Project Group Icon . All relevant data about the project
group is stored in the project group le (extension .mcdsgroup)
Add/Remove Files from Project
The project can contain the following le types:
- .c source les
- .h header les
- .mcl binary les
- .pld project level denes les
- image les
- .ihex EEPROM les
- .hex, .asm and .lst les, see output les. These les can not be added or removed from project.
- other les