User manual

Table Of Contents
mikroC PRO for PIC32
MikroElektronika
549
T6963C_set_cursor
T6963C_clearBit
T6963C_setBit
Prototype
void T6963C_set_cursor(unsigned char x, unsigned char y);
Description Sets cursor to row x and column y.
Parameters - x: cursor position row number
- y: cursor position column number
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
T6963C_set_cursor(cposx, cposy);
Notes None.
Prototype
void T6963C_clearBit(unsigned int b);
Description Clears control port bit(s).
Parameters - b: bit mask. The function will clear bit x on control port if bit x in bit mask is set to 1.
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
// clear bits 0 and 1 on control port
T6963C_clearBit(0x0003);
Notes None.
Prototype
void T6963C_setBit(unsigned int b);
Description Sets control port bit(s).
Parameters - b: bit mask. The function will set bit x on control port if bit x in bit mask is set to 1.
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See the T6963C_init routine.
Example
// set bits 0 and 1 on control port
T6963C_setBit(0x0003);
Notes None.