User manual

mikroC PRO for PIC32
MikroElektronika
517
SPI_T6963C_setPtr
SPI_T6963C_waitReady
SPI_T6963C_ll
Prototype
void SPI_T6963C_setPtr(unsigned int p, unsigned char c);
Description Sets the memory pointer p for command p.
Parameters - p: address where command should be written
- c: command to be written
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
SPI_T6963C_setPtr(SPI_T6963C_grHomeAddr+start, SPI_T6963C_ADDRESS_POINTER_
SET);
Notes None.
Prototype
void SPI_T6963C_waitReady();
Description Pools the status byte, and loops until Toshiba Glcd module is ready.
Parameters None.
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
SPI_T6963C_waitReady();
Notes None.
Prototype
void SPI_T6963C_ll(unsigned char v, unsigned int start, unsigned int
len);
Description Fills controller memory block with given byte.
Parameters - v: byte to be written
- start: starting address of the memory block
- len: length of the memory block in bytes
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
SPI_T6963C_ll(0x33,0x00FF,0x000F);
Notes None.