User manual

388
mikoC PRO for dsPIC
MikroElektronika
Glcd_Init(); // Initialize GLCD
Glcd_Fill(0x00); // Clear GLCD
while(1) {
#ifdef COMPLETE_EXAMPLE
Glcd_Image(truck_bmp); // Draw image
delay2S(); delay2S();
#endif
Glcd_Fill(0x00); // Clear GLCD
Glcd_Box(62,40,124,56,1); // Draw box
Glcd_Rectangle(5,5,84,35,1); // Draw rectangle
Glcd_Line(0, 0, 127, 63, 1); // Draw line
delay2S();
for(ii = 5; ii < 60; ii+=5 ){ // Draw horizontal and vertical lines
Delay_ms(250);
Glcd_V_Line(2, 54, ii, 1);
Glcd_H_Line(2, 120, ii, 1);
}
delay2S();
Glcd_Fill(0x00); // Clear GLCD
#ifdef COMPLETE_EXAMPLE
Glcd_Set_Font(Character8x7, 8, 7, 32); // Choose font, see __Lib_GLCDFonts.c
in Uses folder
#endif
Glcd_Write_Text("mikroE", 1, 7, 2); // Write string
for (ii = 1; ii <= 10; ii++) // Draw circles
Glcd_Circle(63,32, 3*ii, 1);
delay2S();
Glcd_Box(12,20, 70,57, 2); // Draw box
delay2S();
#ifdef COMPLETE_EXAMPLE
Glcd_Fill(0xFF); // Fill GLCD
Glcd_Set_Font(Character8x7, 8, 7, 32); // Change font
someText = “8x7 Font”;
Glcd_Write_Text(someText, 5, 0, 2); // Write string
delay2S();
Glcd_Set_Font(System3x5, 3, 5, 32); // Change font
someText = “3X5 CAPITALS ONLY”;
Glcd_Write_Text(someText, 60, 2, 2); // Write string
delay2S();