User manual

mikroC PRO for dsPIC
MikroElektronika
385
Glcd_Write_Char
Glcd_Write_Text
Prototype
void Glcd_Write_Char(unsigned short character, unsigned short x_pos, unsigned
short page_num, unsigned short color);
Description Prints character on the Glcd.
Parameters - character: character to be written
- x_pos: character starting position on x-axis. Valid values: 0..(127-FontWidth)
- page_num: the number of the page on which character will be written. Valid values: 0..7
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the character: 0 white, 1 black, and 2 inverts each dot.
Returns Nothing.
Requires Glcd needs to be initialized, see Glcd_Init routine. Use Glcd_Set_Font to specify the font for display; if
no font is specied, then default Font_Glcd_System5x7 font supplied with the library will be used.
Example
// Write character ‘C’ on the position 10 inside the page 2:
Glcd_Write_Char(‘C’, 10, 2, 1);
Notes For x axis and page layout explanation see schematic at the bottom of this page.
Prototype
void Glcd_Write_Text(char *text, unsigned short x_pos, unsigned short page_
num, unsigned short color);
Description Prints text on Glcd.
Parameters - text: text to be written
- x_pos: text starting position on x-axis.
- page_num: the number of the page on which text will be written. Valid values: 0..7
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the text: 0 white, 1 black, and 2 inverts each dot.
Returns Nothing.
Requires Glcd needs to be initialized, see Glcd_Init routine. Use Glcd_Set_Font to specify the font for display; if
no font is specied, then default Font_Glcd_System5x7 font supplied with the library will be used.
Example
// Write text “Hello world!” on the position 10 inside the page 2:
Glcd_Write_Text(“Hello world!”, 10, 2, 1);
Notes For x axis and page layout explanation see schematic at the bottom of this page.