User manual

382
mikoC PRO for dsPIC
MikroElektronika
Glcd_Rectangle_Round_Edges_Fill
Glcd_Box
Prototype
void Glcd_Rectangle_Round_Edges_Fill(unsigned short x_upper_left, unsigned
short y_upper_left, unsigned short x_bottom_right, unsigned short y_bottom_
right, unsigned short round_radius, unsigned short color);
Description Draws a lled rounded edge rectangle on Glcd with color.
Parameters - x_upper_left: x coordinate of the upper left rectangle corner. Valid values: 0..127
- y_upper_left: y coordinate of the upper left rectangle corner. Valid values: 0..63
- x_bottom_right: x coordinate of the lower right rectangle corner. Valid values: 0..127
- y_bottom_right: y coordinate of the lower right rectangle corner. Valid values: 0..63
- round_radius: radius of the rounded edge
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the rectangle border: 0 white, 1 black, and 2 inverts
each dot.
Returns Nothing.
Requires Glcd needs to be initialized, see Glcd_Init routine.
Example
// Draws a lled rounded edge rectangle between dots (5,5) and (40,40) with
the radius of 12
Glcd_Rectangle_Round_Edges_Fill(5, 5, 40, 40, 12, 1);
Notes None.
Prototype
void Glcd_Box(unsigned short x_upper_left, unsigned short y_upper_left,
unsigned short x_bottom_right, unsigned short y_bottom_right, unsigned
short color);
Description Draws a box on Glcd.
Parameters :
Parameters - x_upper_left: x coordinate of the upper left box corner. Valid values: 0..127
- y_upper_left: y coordinate of the upper left box corner. Valid values: 0..63
- x_bottom_right: x coordinate of the lower right box corner. Valid values: 0..127
- y_bottom_right: y coordinate of the lower right box corner. Valid values: 0..63
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the box ll: 0 white, 1 black, and 2 inverts each dot.
Returns Nothing.
Requires Glcd needs to be initialized, see Glcd_Init routine.
Example
// Draw a box between dots (5,15) and (20,40)
Glcd_Box(5, 15, 20, 40, 1);
Notes None.