User manual
mikroC PRO for dsPIC
MikroElektronika
363
24F04KA201 and 24F16KA102 Family Speciî‚¿cs :
These MCU's have their Flash memory organized into memory blocks of 32 instructions (96 bytes), unlike other PIC24
devices.
Erasing can be done only in 32-instructions (64 addresses, 96 bytes) memory blocks, which means that the block start
address should be a multiply of 64 (i.e. have 6 lower bits set to zero).
Data is read and written in 32-instructions (64 addresses, 96 bytes) blocks. This means that the block start address
should be a multiply of 64 (i.e. have 6 lower bits set to zero).
Unlike other PIC24 devices, writing or erasing one block of data (32 instructions), is followed by erasing the memory
block of the same size (32 instructions).
Library Routines
dsPIC30 Functions
- FLASH_Erase32
- FLASH_Write_Block
- FLASH_Write_Compact
- FLASH_Write_Init
- FLASH_Write_Loadlatch4
- FLASH_Write_Loadlatch4_Compact
- FLASH_Write_DoWrite
- FLASH_Read4
- FLASH_Read4_Compact
PIC24 and dsPIC33 Functions
- FLASH_Erase
- FLASH_Write
- FLASH_Write_Compact
- FLASH_Read
- FLASH_Read_Compact
dsPIC30 Functions