User manual

354
mikoC PRO for dsPIC
MikroElektronika
S1D13700_Display_Cursor
S1D13700_Write_Char
Prototype
void S1D13700_Display_Cursor(char mode);
Returns Nothing.
Description Displays cursor.
Parameters :
- mode: mode parameter. Valid values:
Requires Glcd module needs to be initialized. See the S1D13700_Init routine.
Example
// set cursor on
S1D13700_Display_Cursor(S1D13700_CURSOR_ON);
Prototype
void S1D13700_Write_Char(unsigned char c, unsigned int x, unsigned int y,
unsigned char mode);
Returns Nothing.
Description Writes a char in the current text layer of Glcd at coordinates (x, y).
Parameters :
- c: char to be written.
- x: char position on x-axis (column).
- y: char position on y-axis (row).
- mode: mode parameter. Valid values :
Requires Glcd module needs to be initialized. See the S1D13700_Init routine.
Example
S1D13700_Write_Char(‘A’,22,23,S1D13700_OVERLAY_OR);
Value Description
S1D13700_CURSOR_OFF
Turn off graphic layer.
S1D13700_CURSOR_ON
Turn on graphic layer.
S1D13700_CURSOR_FLASH_2Hz
Turn on graphic layer and ash it at the rate of 2 Hz.
S1D13700_CURSOR_FLASH_16Hz
Turn on graphic layer and ash it at the rate of 16 Hz.
Value Description
S1D13700_OVERLAY_OR
In the OR-Mode, text and graphics can be displayed and the
data is logically “OR-ed”.
This is the most common way of combining text and graphics, for
example labels on buttons.
S1D13700_OVERLAY_XOR
In this mode, the text and graphics data are combined via the
logical “exclusive OR”.
S1D13700_OVERLAY_AND
The text and graphic data shown on display are combined via the
logical “AND function”.