User manual
mikroC PRO for dsPIC
MikroElektronika
135
Notes :
The user can change the clock in the Stopwatch Window, which will recalculate values for the latest specied
frequency.
Changing the clock in the Stopwatch Window does not affect actual project settings – it only provides a simulation.
Stopwatch is available only when Software Simulator is selected as a debugger.
EEPROM Watch Window
Note : EEPROM Watch Window is available only when mikroICD is selected as a debugger.
To show the EEPROM Watch Window, select Debug Windows › EEPROM from the View drop-down menu.
The EEPROM Watch Window shows current content of the MCU's internal EEPROM memory.
There are two action buttons concerning the EEPROM Watch Window :
- Reads data from MCU's internal EEPROM memory and loads it up into the EEPROM window.
- Writes data from the EEPROM window into MCU's internal EEPROM memory.