User manual

128
mikoC PRO for dsPIC
MikroElektronika
Notes :
- The user can change the clock in the Stopwatch Window, which will recalculate values for the latest
specied frequency.
- Changing the clock in the Stopwatch Window does not affect actual project settings – it only provides a simulation.
- Stopwatch is available only when Software Simulator is selected as a debugger.
EEPROM Watch Window
Note : EEPROM Watch Window is available only when mikroICD is selected as a debugger.
To show the EEPROM Watch Window, select Debug Windows › EEPROM from the View drop-down menu.
The EEPROM Watch Window shows current content of the MCU's internal EEPROM memory.
There are two action buttons concerning the EEPROM Watch Window :
- Reads data from MCU's internal EEPROM memory and loads it up into the EEPROM window.
- Writes data from the EEPROM window into MCU's internal EEPROM memory.