User manual

mikroBasic PRO for PIC32
MikroElektronika
495
SPI_T6963C_image
SPI_T6963C_PartialImage
Prototype
sub procedure SPI_T6963C_image(dim pic as ^ const byte)
Description Displays bitmap on Glcd.
Parameters - pic: image to be displayed. Bitmap array can be located in both code and RAM memory (due to the
mikroBasic PRO for PIC32 pointer to const and pointer to RAM equivalency).
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
SPI_T6963C_image(my_image)
Notes Image dimension must match the display dimension.
Use the integrated Glcd Bitmap Editor (menu option Tools › Glcd Bitmap Editor) to convert image to
a constant array suitable for displaying on Glcd.
Prototype
sub procedure SPI_T6963C_PartialImage(dim x_left, y_top, width, height,
picture_width, picture_height as word, const image as ^byte)
Description Displays a partial area of the image on a desired location.
Parameters - x_left: x coordinate of the desired location (upper left coordinate).
- y_top: y coordinate of the desired location (upper left coordinate).
- width: desired image width.
- height: desired image height.
- picture_width: width of the original image.
- picture_height: height of the original image.
- image: image to be displayed. Bitmap array can be located in both code and RAM memory (due to
the mikroBasic PRO for PIC pointer to const and pointer to RAM equivalency).
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
‘ Draws a 10x15 part of the image starting from the upper left corner on the
coordinate (10,12). Original image size is 16x32.
SPI_T6963C_PartialImage(10, 12, 10, 15, 16, 32, @image)
Notes Image dimension must match the display dimension.
Use the integrated Glcd Bitmap Editor (menu option Tools › Glcd Bitmap Editor) to convert image to
a constant array suitable for displaying on Glcd.