User manual

618
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
TP_TFT_Get_Coordinates
Prototype
sub function TP_TFT_Get_Coordinates(dim byref x_coordinate as word, dim
byref y_coordinate as word) as byte
Description Get touch panel coordinates and store them in x_coordinate and y_coordinate parameters.
Parameters - x_coordinate: x coordinate of the place of touch.
- y_coordinate: y coordinate of the place of touch.
Returns - 1 - if reading is within display dimension range.
- 0 - if reading is out of display dimension range.
Requires Nothing.
Example
if (TP_TFT_Get_Coordinates(@x_coord, @y_coord) = 0) then
...
end if
Notes None.
TP_TFT_Calibrate_Min
Prototype
sub procedure TP_TFT_Calibrate_Min()
Description Calibrate bottom left corner of the touch Panel.
Parameters None.
Returns Nothing.
Requires Nothing.
Example
TP_TFT_Calibrate_Min() ‘ Calibration of bottom left corner
Notes None.
TP_TFT_Calibrate_Max
Prototype
sub procedure TP_TFT_Calibrate_Max()
Description Calibrate upper right corner of the touch panel.
Parameters None.
Returns Nothing.
Requires Nothing.
Example
TP_TFT_Calibrate_Max() ‘ Calibration of upper right corner
Notes None.