User manual

562
mikoBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
SPI_T6963C_cursor_blink
Prototype
sub procedure SPI_T6963C_cursor_blink(dim n as word)
Description Enable/disable cursor blinking.
Parameters - n: cursor blinking enable/disable parameter. Valid values: 0 (disable cursor blinking) and 1 (enable
cursor blinking).
Returns Nothing.
Requires Toshiba Glcd module needs to be initialized. See SPI_T6963C_Cong routine.
Example
‘ enable cursor blinking
SPI_T6963C_cursor_blink(1)
Notes None.
Library Example
The following drawing demo tests advanced routines of the SPI T6963C Glcd library. Hardware congurations in this
example are made for the EasydsPIC4A board and dsPIC30F4013.
Copy Code To Clipboard
program SPI_T6963C_240x128
include __Lib_SPIT6963C_Const
dim
‘ Port Expander module connections
SPExpanderRST as sbit at LATF0_bit
SPExpanderCS as sbit at LATF1_bit
SPExpanderRST_Direction as sbit at TRISF0_bit
SPExpanderCS_Direction as sbit at TRISF1_bit
‘ End Port Expander module connections
dim panel as byte ‘ current panel
i as word ‘ general purpose register
curs as byte ‘ cursor visibility
cposx,
cposy as word ‘ cursor x-y position
txt, txt1 as string[29]
main:
txt1 = “ EINSTEIN WOULD HAVE LIKED mE”
txt = “ GLCD LIBRARY DEMO, WELCOME !”
#DEFINE COMPLETE_EXAMPLE ‘ comment this line to make simpler/smaller example
ADPCFG = 0xFFFF ‘ initialize AN pins as digital
TRISB8_bit = 1 ‘ Set RB8 as input
TRISB9_bit = 1 ‘ Set RB9 as input
TRISB10_bit = 1 ‘ Set RB10 as input