User manual

mikroBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
383
Man_Receive
Man_Send_Init
Prototype
sub function Man_Receive(dim byref error as word) as byte
Description The function extracts one byte from incoming signal.
Parameters - error: error ag. If signal format does not match the expected, the error ag will be set
to non-zero.
Returns A byte read from the incoming signal.
Requires To use this function, the user must prepare the MCU for receiving. See Man_Receive_Init routines.
Example
dim data_, error as word
...
error = 0
data_ = 0
data_ = Man_Receive(error)
if (error <> 0) then
‘ error handling
end if
Notes None.
Prototype
sub procedure Man_Send_Init()
Description The function congures Transmitter pin.
Parameters None.
Returns Nothing.
Requires Global variables:
- MANTXPIN : Transmit line
- MANTXPIN_Direction : Direction of the transmit pin
must be dened before using this function.
Example
‘ Initialize Transmitter:
dim MANTXPIN as sbit at LATF1_bit
dim MANTXPIN_Direction as sbit at TRISF1_bit
...
Man_Send_Init()
Notes None.