User manual

mikroBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
351
Library Routines
Basic routines:
- Glcd_Init
- Glcd_Set_Side
- Glcd_Set_X
- Glcd_Set_Page
- Glcd_Read_Data
- Glcd_Write_Data
Advanced routines:
- Glcd_Fill
- Glcd_Dot
- Glcd_Line
- Glcd_V_Line
- Glcd_H_Line
- Glcd_Rectangle
- Glcd_Rectangle_Round_Edges
- Glcd_Rectangle_Round_Edges_Fill
- Glcd_Box
- Glcd_Circle
- Glcd_Circle_Fill
- Glcd_Set_Font
- Glcd_Write_Char
- Glcd_Write_Text
- Glcd_Image
- Glcd_PartialImage
Glcd_Init
Prototype
sub procedure Glcd_Init()
Description Initializes the Glcd module. Each of the control lines are both port and pin congurable, while data
lines must be on a single port (pins <0:7>).
Parameters None.
Returns Nothing.
Requires Global variables:
- GLCD_D0 : Data pin 0
- GLCD_D1 : Data pin 1
- GLCD_D2 : Data pin 2
- GLCD_D3 : Data pin 3
- GLCD_D4 : Data pin 4
- GLCD_D5 : Data pin 5
- GLCD_D6 : Data pin 6
- GLCD_D7 : Data pin 7
- GLCD_CS1 : Chip select 1 signal pin
- GLCD_CS2 : Chip select 2 signal pin
- GLCD_RS : Register select signal pin
- GLCD_RW : Read/Write Signal pin