Datasheet

T6963C_Init
445
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroBasic PRO for AVR
CHAPTER 6
Prototype
sub procedure T6963C_init(dim width, height, fntW as byte)
Returns Nothing.
Description
Initalizes the Graphic Lcd controller.
Parameters :
-
width: width of the Glcd panel
- height: height of the Glcd panel
- fntW: font width
Display RAM organization:
The library cuts the RAM into panels : a complete panel is one graphics panel
followed by a text panel (see schematic below).
schematic:
+---------------------+ /\
+ GRAPHICS PANEL #0 + |
+ + |
+ + |
+ + |
+---------------------+ | PANEL 0
+ TEXT PANEL #0 + |
+ + \/
+---------------------+ /\
+ GRAPHICS PANEL #1 + |
+ + |
+ + |
+ + |
+---------------------+ | PANEL 1
+ TEXT PANEL #2 + |
+ + |
+---------------------+ \/
Requires
Global variables :
-
T6963C_dataPort: Data Port
-
T6963C_ctrlPort: Control Port
- T6963C_ctrlwr: Write signal pin
- T6963C_ctrlrd: Read signal pin
-
T6963C_ctrlcd: Command/Data signal pin
- T6963C_ctrlrst: Reset signal pin
- T6963C_dataPort_Direction: Direction of Data Port
-
T6963C_ctrlPort_Direction: Direction of Control Port
- T6963C_ctrlwr_Direction: Direction of Write signal pin
- T6963C_ctrlrd_Direction: Direction of Read signal pin
-
T6963C_ctrlcd_Direction: Direction of Command/Data signal pin
- T6963C_ctrlrst_Direction: Direction of Reset signal pin
must be defined before using this function.