Datasheet

SPI_Glcd_V_Line
SPI_Glcd_H_Line
396
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroBasic PRO for AVR
CHAPTER 6
Prototype
sub procedure SPI_Glcd_V_Line(dim y_start as byte, dim y_end as
byte, dim x_pos as byte, dim color as byte)
Returns Nothing.
Description
Draws a vertical line on Glcd.
Parameters :
-
y_start: y coordinate of the line start. Valid values: 0..63
- y_end: y coordinate of the line end. Valid values: 0..63
- x_pos: x coordinate of vertical line. Valid values: 0..127
-
color: color parameter. Valid values: 0..2
Parameter color determines the line color: 0 white, 1 black, and 2 inverts each dot.
Requires Glcd needs to be initialized for SPI communication, see SPI_Glcd_Init routines.
Example
' Draw a vertical line between dots (10,5) and (10,25)
SPI_Glcd_V_Line(5, 25, 10, 1)
Prototype
sub procedure SPI_Glcd_V_Line(dim x_start as byte, dim x_end as
byte, dim y_pos as byte, dim color as byte)
Returns Nothing.
Description
Draws a horizontal line on Glcd.
Parameters :
-
x_start: x coordinate of the line start. Valid values: 0..127
-
x_end: x coordinate of the line end. Valid values: 0..127
- y_pos: y coordinate of horizontal line. Valid values: 0..63
- color: color parameter. Valid values: 0..2
The parameter color determines the line color: 0 white, 1 black, and 2 inverts
each dot.
Requires Glcd needs to be initialized for SPI communication, see SPI_Glcd_Init routines.
Example
' Draw a horizontal line between dots (10,20) and (50,20)
SPI_Glcd_H_Line(10, 50, 20, 1)