Datasheet

Glcd_Dot
Glcd_Line
224
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroBasic PRO for AVR
CHAPTER 6
Prototype
sub procedure Glcd_Dot(dim x_pos as byte, dim y_pos as byte, dim
color as byte)
Returns Nothing.
Description
Draws a dot on Glcd at coordinates (x_pos, y_pos).
Parameters :
-
x_pos: x position. Valid values: 0..127
- y_pos: y position. Valid values: 0..63
- color: color parameter. Valid values: 0..2
The parameter
color determines a dot state: 0 clears dot, 1 puts a dot, and 2
inverts dot state.
Note: For x and y axis layout explanation see schematic at the bottom of this page.
Requires Glcd needs to be initialized, see Glcd_Init routine.
Example
' Invert the dot in the upper left corner
Glcd_Dot(0, 0, 2)
Prototype
sub procedure Glcd_Line(dim x_start as integer, dim y_start as inte-
ger, dim x_end as integer, dim y_end as integer, dim color as byte)
Returns Nothing.
Description
Draws a line on Glcd.
Parameters :
-
x_start: x coordinate of the line start. Valid values: 0..127
- y_start: y coordinate of the line start. Valid values: 0..63
-
x_end: x coordinate of the line end. Valid values: 0..127
- y_end: y coordinate of the line end. Valid values: 0..63
- color: color parameter. Valid values: 0..2
The parameter color determines the line color: 0 white, 1 black, and 2 inverts
each dot.
Requires Glcd needs to be initialized, see Glcd_Init routine.
Example
' Draw a line between dots (0,0) and (20,30)
Glcd_Line(0, 0, 20, 30, 1)