Datasheet

8
UNI-DS6
MikroElektronika
page
3. Placing mikroBoard
The UNI-DS6 development system is designed for usage with various mikroBoards� All the mikroBoards are placed in
a universal mikroBoard socket , Figure 3-1� This socket consists of two 2x40 female headers� To place mikroBoard in
this socket follow the steps below:
Figure 3-1: mikroBoard placed in socket
STEP 1:
Make sure that all header pins on mikroBoard
are aligned with the mikroBoard socket
STEP 2:
Apply pressure on mikroBoard
edges until it fully ts the socket