Datasheet

MikroElektronika
Figure 1: StartUSB for PIC development system
How to connect the development system?
The StartUSB for PIC development system can be easily connected to a PC via a USB connector CN2, Figure 3. The
microcontroller pins can be connected to a device via 1x12 connectors CN3 and CN4. A 1x5 connector CN1 enables
connection with the PICFlash programmer. An LED labelled POWER is used to indicate whether the board is turned on
or off, whereas LEDs RA1 and RB1 can be congured to indicate the logic state on the RA1 and RB1 pins.
StartUSB for PIC
The StartUSB for PIC is a miniature development system that enables you to experiment with the PIC18F2550
microcontroller.
Key features:
- Bootloader;
- Proto board;
- USB support;
- 5V power supply voltage.