Datasheet

Page 18
The microcontroller can be also
programmed with ICD2
®
or ICD3
®
programmer. These programmers
connects with mikromedia board
via ICD2 CONNECTOR BOARD.
Programing with
ICD2
®
or ICD3
®
programmer
In order to enable the ICD2
®
and ICD3
®
programmers to be connected to the development system, it is
necessary to provide the appropriate connector such as the ICD2 CONNECTOR BOARD. This connector should
be first soldered on the CN5 connector. Then you should plug the ICD2
®
or ICD3
®
programmer into it, Figure 3-11.
Figure 3-11:
Connecting ICD2
®
or ICD3
®
programmer