Datasheet

Page 12

Programming with mikroBootloader

You can program the microcontroller with bootloader which

is preprogrammed into the device by default. To transfer

.hex le from a PC to MCU you need bootloader software

(mikroBootloader USB HID) which can be downloaded from:

Upon download, unzip it to desired location and start the

mikroBootloader application:

Figure 3-2: USB HID mikroBootloader window

step 1 – Connecting mikromedia

To start, connect the USB cable, or if already connected

press the Reset button on your mikromedia board. Click the

Connect button within 5s to enter the bootloader mode,

otherwise existing microcontroller program will execute.

http://www.mikroe.com/downloads/get/1605/

mikrobootloader_pic32mx4_v210.zip